|
|
|
| Used Pre-Owned: 2003
Custom Painted Pink Vespa ET2 SOLD |

The newly designed 2003 Vespa ET2 is powered by a sporty and reliable 50cc air-cooled
SOHC engine. The powerplant delivers excellent performance and power (5.1
bhp) that is
far smoother and more progressive than the competition and has the
reliability we’ve come to expect in 2-strokes, top speed is about 40+ mph.
*$3,199

Front View - At 223 lbs. the ET2 50cc is light and agile on
10" wheels
in the front and 10" wheels in the rear. Mirrors are custom painted.

Pink is NOT a Vespa Factory Color and is a $1,200
Custom Paint Job!
Right Side Front View - Yellow Turn Signal Indicators
and Front Reflectors

Right Side View - Pressed Steel Monocoque Body For
Greater Strength and
Fold-Down Style Center Stand for
Stability.

Right Side Rear View
Scooter Includes Optional Pink Painted Top Case With Passenger Back Rest.

Rear View
Showing Top Case Reflector Tail Lights and Rear View Mirrors

Left Side Rear View- Vespa Rear Badging & License
Plate Frame

Left Side View - Electric Start and Redundant Kick
Start

Driver's Instrumentation - In a Functional
Layout

Only 302 Original Miles - A Very Clean Rare Scooter!!!

Left Side Driver's Controls - Bright Lights, Turn
Signals and Horn Button

Right Side Driver's Controls - Emergency Engine Cut
Off, Electric Start and Throttle

Locking Glove Compartment Opens By Pressing In Ignition
Switch

Interior View of Locking Glove Compartment

Seat Pull-Out Hook To Hang Your Shopping Bags

Large Blue Seat For Two People With Underseat Locking
Storage

Underseat Top View of Removable Storage Bucket &
Oil Filler Cap
View of Gas Cap
(use 93 octane unleaded gas) and 12V Battery
Cover

Top View of Removable Storage Bucket Showing Owner's
Manual

Close-Up View of Manufacturer's VIN Plate Showing Vehicle Identification Number
VIN # ZAPC16C1935005401
Gross Vehicle Weight Rating (GVWR) 640 lbs. and Tire Size: 110/80-10 L
Front Inflate to 23.2 PSI COLD, 120/70-10 L Rear Inflate to 29.0 PSI COLD.

Included Optional Custom Pink Painted Locking Top Case

Interior Of Removable Locking Top Case

Exhaust System With Chrome Exhaust Shield

Automatic Transmission Cover Detail and Silver Kick Start
Lever

Front Shield Metal Vespa Badging

Front Vespa Aircraft Type Strut Suspension & Disk
Brake

Close-Up of Five Spoke Front Alloy Wheel

Close-Up View of Like New Tire Tread

Welded "U" Security Cable Lock Point

There Are Some Small Scratches Above The Exhaust Shield
On The Fender Molding
(The Vertical Lines In The Center Are The Scratches,
The Horizontal Lines Above And To The Left Are Reflections.)

There Are Some Small Scratches On The Floor Board and
On The Fender Molding
Technical Specifications
| Vespa |
ET2 50cc |
| Made in: |
Pontedera, Italy |
| Frame |
Pressed steel monocoque |
| Engine type |
Single cylinder, two-stroke Piaggio engine |
| Engine power |
5 bhp (Approximate) |
| Engine size (displacement) |
49.4 cc |
| Bore |
1.6 in. (40.0 mm) |
| Stroke |
1.5 in. (39.3 mm) |
| Compression ratio |
10.3:1 |
| Lubrication |
Separate with automatic oil pump |
| Oil |
2-stroke synthetic oil (Selenia oil is recommended) |
| Fuel |
Unleaded 91 octane minimum |
| Fuel capacity |
2.4 gal (9 liters) |
| Mileage |
Approx. 65 mpg |
| Induction |
Reed valve in crankcase |
| Ignition |
Electronic CDI (note the letter "E" in ET stands for
electronic ignition) |
| Starter |
Electric and kick starter |
| Engine Cooling |
Forced air |
| Transmission |
Automatic Continuous Variable Transmission with torque server |
| Clutch |
Automatic centrifugal type |
| Weight (curbside): |
216 lbs. (98 kg) |
| Length: |
69.3 in. (1,760 mm) |
| Width: |
26.4 in. (670 mm) |
| Wheel base: |
50.4 in. (1,280 mm) |
| Seat height: |
31.7 in. (805 mm) |
| Front wheel rim |
Die-cast aluminum alloy, 2.50 - 10" |
| Rear wheel rim |
Die-cast aluminum alloy, 3.00 - 10" |
| Front tire |
Tubeless 100/80 - 10" |
| Rear tire |
Tubeless 120/70 - 10" |
| Front suspension |
Swinging arm (aeronautical type) with helicoidal spring and hydraulic
double effect single damper. This type of suspension has been adopted on
all Vespa models since 1946. |
| Rear suspension |
Helicoidal spring and hydraulic double effect single damper |
| Front brake |
Disc brake (7.9 in. [200 mm] diameter) with hydraulic linkage (r.h. brake
lever) and dual piston hydraulic caliper |
| Rear brake |
Drum brake (diameter 4.3 in. [110 mm]) with mechanical linkage (l.h. brake
lever) |
| Warranty |
Pre-Owned - No Warranty |
|
|
| * Price Shown On Above Scooter Is F.O.B. Fort
Lauderdale, Florida and Is Exclusive of Dealer Fees
($198), State Sales Tax (Florida Only), County Sur-Tax
(If Applicable), In-State Tag & Title Fee ($125.00),
Optional Equipment (Not Already Installed On Scooter)
and Financing Charges (If Any). Shipping and/or Delivery
Charges are Extra.
Please feel free to contact
us for more information about New & Used Aprilia
Scarabeo Scooters that we have in stock. We ship all over the USA
and offer full service & repair in S. Florida
including Miami - Dade County, Fort Lauderdale - Broward
County and West Palm Beach - Palm Beach County.
|
 |
Varsity Cycle . 2601 N Federal
Highway . Fort Lauderdale . FL 33306
Phone Toll Free: 800-376-9402 . Fax : 954-561-0235 |
|
Copyright Varsity Cycle 2004 . Privacy
Policy . SiteMap
. Search . Links
|
|